Fiberglass Mesh Cloth
Posted on 3月 3, 2008 - Filed Under Fiberglass Mesh | Leave a Comment
Fiberglass mesh takes the moderate alkali or alkali less glass fibre intertexture as the basic material and the material is managed by smearing alkali resisting pastern on it. This product has a high strength at intension, excellent alkali & acid resistance, strong adhesion with resin, easy dissolution in styrene, with top stiffness and orientation, widely used as an ideal reinforcement material. It is mainly used on inside and outside wall heat preservation and the strengthening of stone material, bitumen, concrete product and gypsum product. It is the ideal construction material.
Product Specifications:
Mesh Size: 4 x 4/4 x 5/5 x 5mm
Weight: 40gsm-210gsm
Standard roll size: 1 x 50m
Filament Diameter: 11um
Special size as per customers’ requirements
Packing: shrink packing, carton
袖扣生产
Posted on 3月 3, 2008 - Filed Under Fiberglass Mesh | Leave a Comment
Product Description
Fiberglass mesh takes the moderate alkali or alkali less glass fibre intertexture as the basic material and the material is managed by smearing alkali resisting pastern on it. This product has a high strength at intension, excellent alkali & acid resistance, strong adhesion with resin, easy dissolution in styrene, with top stiffness and orientation, widely used as an ideal reinforcement material. It is mainly used on inside and outside wall heat preservation and the strengthening of stone material, bitumen, concrete product and gypsum product. It is the ideal construction material.
Product Specifications:
Mesh Size: 4 x 4/4 x 5/5 x 5mm
Weight: 40gsm-210gsm
Standard roll size: 1 x 50m
Filament Diameter: 11um
Special size as per customers’ requirements
Packing: shrink packing, carton
Fiberglass Mesh
Posted on 3月 3, 2008 - Filed Under fiberglass manufacturer | Leave a Comment
Product Description
Alkaline-resistant fiberglass mesh is woven by fiber glass yarn as its basis fabric, then coated by alkaline resistant latex;
After surface treatment, this alkali-resistant mesh has fine alkaline-resistance and high strength, Water-resistance, alkali-resistance, flexibility, softness and resistance to aging;
It is widely used in reinforcing walls, natural marble, plaster board, artificial stone materials, exterior insulation finishing system and renovating building surface;
Features:
1. Mesh size: 4×4mm/4×5mm/5×5mm;
2. Weight/m2: 65g-200g;
3. Width/roll: 60 - 2, 00cm;
4. Length/roll: 20 - 500m;
5. Color: white (standard), blue, yellow, etc;
6. Packing: Shrank wrappedl each roll, 30 rolls per carton/ pallet or small cartons;
PVC coated fiberglass mesh can be also produced.
Fiberglass Geo-Grids
Posted on 12月 17, 2007 - Filed Under fiberglass manufacturer | Leave a Comment
Fiberglass Geo-Grids is based on fiberglass woven cloth coated with modified asphalt polymer resin.
It was developed to address the problem of pavement cracking on highways, roads and runways, driven by a need to reduce costs for infrastructure maintenance and repair.
It is characterized by high tensile strength in axial and lateral directions, low stretch rate, alkali-resistance, high temperature-resistance, as well as convenience in construction and low price. It can be used on pitch pavement, bituminous concrete pavement and cement pavement to prevent cracks occurring and prolong pavement service life. It also can be used as a basal reinforcement material for hillsides, reservoirs, harbors, ports, water channels, seawalls, etc.
Fiberglass geo-grids have the following excellent properties
1. High tensile strength: The strength-to-weight ratio of fiberglass is greater than that of plain carbon steel. At 20oC, the ratio of its elastic modulus to that of asphalt concrete is 20: 1. Thus it is strong enough to prevent deflection cracks.
2. Low elongation: The fiberglass grid stress diagram shows as a vertical straight line, which indicates that its ability of deforming resistance is very high and its break elongation is less than 4%.
3. Creep resistance: Fiberglass grid is not subject to creep, unlike many other materials. When bearing a load for long periods, fiberglass grid will not permanently deform.
4. Chemical compatibility with surfacing materials: Fiberglass grid is coated with an inorganic sizing that makes it chemically compatible to all the materials used in surfacing mixes.
5. Wide temperature range: The melting point of fiberglass is 1000oC, while that of hot asphalt is 160oC. Therefore, fiberglass grid is unaffected by the highest temperatures experienced in road surfacing. It is also unaffected by low temperatures and retains its strength in temperatures as low as -100oC. Unlike other materials such as carbon fiber, Kevlar fiber, steel rib and plaster fiber, the elastic modulus of fiberglass is not affected by temperature change.
6. Physical and chemical stability: Fiberglass grid is treated with special inorganic sizing that makes it very resistant to physical wear and a wide range of corrosive environments created by chemical, biological and climatic changes.
7. Nesting, interlock and restraint effects: Asphalt road mix extrudes through the holes of grid, thereby forming a nesting and interlocking mechanism that restrains movement of the mix. This allows for improved loading bearing capability and greater dimensional stability. An asphalt road mix reinforced with fiberglass grid, which acts as a frame in the surfacing materials, forms a monolithic construction similar to steel reinforced concrete.
Application:
* Reinforcement for Road Pavement
* Reinforcement for Railway Basement
* Reinforcement for Tunnel
* Reinforcement for Slope
* Reinforcement for embankment
Packing and Storage
Package:
Each roll is shrink-wrapped, or to be packed in plastic bag.
Diameter of paper tube (mm): 55, 76
Storage:
STore in a cool and dry location, the best condition for storage is under a temperature between 15 and 35, and at a relative humidity between 35% and 65%.
Store in a dust-free environment.
Protect rolls from weather and other damages.
fiberglass manufacturerfiberglass manufacturerFiberglass Alkali Resistant Mesh Cloth
Posted on 11月 11, 2007 - Filed Under Fiberglass Mesh | Leave a Comment
Made of high quality alkali-free or medium alkali glass fiber, this product is woven
with the advanced special glass fiber loom according to customers’ requirements.
The screen cloth has various kinds of mesh numbers with a maximum breadth of 2,400mm.
As a reinforced material, this product may be further made into the following items
after soaked by various resins:
1. Wall cloth for architecture applications
2. Reinforced meshwork for stones
3. Reinforced meshwork for grinding wheels
4. Reinforced meshwork for gypsum
5. Meshwork for other uses
Specifications:
5 x 5mm (twist weave):150gsm, 260gsm, 230gsm
6 x 6mm (twist weave): 190gsm, 170gsm, 210gsm, 230gsm, 260gsm
8 x 8mm (twist weave): 50gsm, 60gsm, 80gsm, 125gsm, 150gsm
8 x 8mm (plain weave): 260gsm, 330gsm
11 x 11mm (plain weave): 150gsm, 260gsm
14 x 14mm (twist weave): 80gsm
18 x 18mm (plain weave): 180gsm
Width/breath: more or less 1.15m
Length: 100m-300m
Fiberglass mesh
Posted on 11月 11, 2007 - Filed Under Fiberglass Mesh | Leave a Comment
The fiberglass alkaline-resistance mesh fabric is on the basis of C-glass or E-glass woven fabric, then coated by acrylic acid copolymer liquid, possesses the properties of good alkaline-resistance, high strength, good cohesion, excellent in coating etc. It is widly used in wall reinforce, out-side wall heat insulation, roof waterproof. It can also reinforce cement, plastic, bitumen, plaster, marble, marble, mosaic etc. It is an ideal engineering material in construction
spec:Â 600/900/1000*10*10*125G
          600/900/1000*8*8*100G
           1000*5*5*125G
           1000*5*5*145G
           1000*4*4*80G
            1000*4*4*120G
           1000*4*4*160G
           1000*4*5*80G
            1000*4*5*120G
           1000*2.85*2.85*75G
Self-Adhesive Fiberglass Drywall Joint Tape
Posted on 11月 11, 2007 - Filed Under Fiberglass Mesh | Leave a Comment
Features:
1) Fast application
2) Highly adhesive and does not require pasting or stapling
3) Tear, shrink, stretch and bubble proof
4) Hides joints, cracks and holes permanently
5) Material: E-glass or C-glass.
6) Width: 50mm, 100mm, subject to requirement
7) Roll length: 20m, 45m, 90m, 153m (Europe) / 65', 150', 300',
500' (N. America), subject to requirements
Color: white (standard), custom color
9) Logo printing optional
Inner packing:
Shrink wrapped with label or polybag
fiberglass meshfiberglass mesh Coated Alkali Resistant Fiberglass Mesh
Posted on 11月 11, 2007 - Filed Under Fiberglass Mesh | Leave a Comment
Features:
1) Based on the fiberglass fabric, coated by the acrylic acid copolymer liquid
2) This product has the high property on strength and alkali resistant
3) It is widely used in reinforcement wall building, cement, plaster, marble,
man-made board
4) It can also be used in the innovation of external wall materials.
5) It is an ideal engineering material for construction.
Specifications:
1) Mesh size: 4 x 4mm, 4 x 5mm, 5 x 5mm, 10 x 10mm
2) Weight: 60 - 200g/m2
3) Length and width: according to customer’s requirements
4) Colors: white, blue, orange, yellow, or according to requirements
Packing:
Carton or pallet
Fiberglass
Posted on 11月 1, 2007 - Filed Under Fiberglass Mesh | Leave a Comment
Fiberglass
Alkali Resistant Fiberglass Mesh Fabric fiberglass meshAlkali Resistant Fiberglass Mesh Fabric fiberglass meshcorner bead
Posted on 10月 24, 2007 - Filed Under Fiberglass Mesh | Leave a Comment
Wing: 63.5*63.5 mm Material: PVCcorner bead fiberglass meshcorner bead fiberglass mesh keep looking »